Clinical significance of contact lens related changes of ocular surface tissue observed on optical coherence images

PurposeTo investigate the relationship between the real contact lens imprint into the conjunctival tissue, observed by optical coherence tomography (OCT) and conjunctival staining and contact lens wearing comfort.Methods17 participants (mean age = 26.6 SD ± 3.6 years; 7 females) were fitted with three different contact lenses base curves of the same silicone hydrogel custom lens type (Visell 50; Hecht Contactlinsen, Au, Germany) in a randomised order. One lens was optimally fitted according to the manufacturer's recommendation, one fitted 0.4 mm flatter and one fitted 0.4 mm steeper. After 4 h of lens wear the contact lens edge in the area of the conjunctiva was imaged nasally and temporally using OCT (Optovue iVue SD-OCT). To correct the artefact due to optical distortion with OCT, the imprint of all worn lenses was measured on a glass plate afterwards. Conjunctival staining in the limbal region after 4 h of lens wear was classified using the CCLRU Grading Scale. Comfort scoring was based on visual analog scales from 0 (very poor) to 100 (excellent).ResultsThe mean conjunctival imprint of all contact lens edges was 32.0 ± 8.1 μm before and 7.3 ± 6.5 μm after distortion correction of the OCT images. The distortion corrected conjunctival imprint with the 0.4 mm steeper lens (11.5 ± 6.2 μm) was statistically significantly greater compared to the optimally fitted lens (6.5 ± 5.9 μm) (One-way ANOVA followed Tukey-test; p = 0.017) and greater compared to the 0.4 mm flatter lens (3.9 ± 5.3 μm) (p < 0.001). There was no statistically significant difference between the optimally fitted lens and the 0.4 mm flatter lens (p = 0.209). The nasally measured imprint (11.4 ± 9.0 μm) was significantly greater than the temporally measured (3.3 ± 7.6 μm) (p < 0.001). There was no statistically significant correlation between the amount of conjunctival imprint and the graded conjunctival staining (p = 0.346) or the wearer’s comfort (p = 0.735).ConclusionsContact lens edges imaged by OCT exhibited displacement artefacts. The observed conjunctival imprints are a combination of real conjunctival compression and artefacts. A deeper imprint of the contact lens into the conjunctiva caused by a steeper base curve was not related to clinically significant staining or changes in comfort after 4 h of lens wear. The observed differences between nasal and temporal imprint are likely to be caused by variations of conjunctival thickness and the shape of the underlying sclera.     

2011～2020年华北平原气溶胶光学厚度时空分布特征及潜在源分析

随着经济高速增长和城市化进程不断加快,华北平原区域性空气污染问题愈演愈烈。针对该区域开展长时序气溶胶光学厚度时空分布特征和潜在源分析研究,对华北平原大气污染治理具有重要意义。基于长时序MODIS/Terra C6.1 MOD04_L2气溶胶光学厚度产品,分析华北平原气溶胶光学厚度的时空分布特征,并利用后向轨迹聚类分析讨论华北平原7个重点城市气团输送的季节变化,并以污染较为严重的河北石家庄为例进行潜在源分析和浓度权重分析,探究影响其大气质量的污染物潜在源区。结果表明:2011～2020年华北平原气溶胶光学厚度月均值呈显著的周期性变化,以年为周期,每个周期内峰值一般出现在6月至8月; 气溶胶光学厚度月际年内呈单峰分布,峰值出现在6月(0.75),最小值出现在12月(0.37); 气溶胶光学厚度季均值从大到小依次为夏季(0.67)、春季(0.59)、冬季(0.49)、秋季(0.46); 10年间气溶胶光学厚度呈下降趋势,整体下降幅度达36.84%,其中2011年最高(0.72),2018年最低(0.45); 华北平原7个重点城市春、夏、秋、冬四季主要受短距离气团输送影响较大,长距离气团输送影响较小; 2014～2020年河北石家庄的空气质量优良天数占比相对较小,空气质量状况差,影响其空气质量的污染物多为本地生成,同时也受周边省市近距离输送的影响。     

Permeability differences based on three-dimensional geometrical information of void spaces

In this study,the permeabilities of Berea and Otway sandstones were measured under different confining pressures,and porosity was investigated through mercury intrusion porosimetry(MIP).The total porosities of the Berea and Otway sandstones were approximately 17.4%and 25%,respectively.Pore size distributions of each sandstone were almost the same,but the pores in the Otway sandstone were slightly narrower.However,the permeability of the Otway sandstone was smaller than that of the Berea sandstone by one order of magnitude.Three-dimensional(3D)void geometry and geometrical properties of the void spaces relevant to flow were compared to obtain the relation between the permeability differences and porosities of the two sandstones.The 3D geometrical analysis using microfocus X-ray computed tomography(CT)was performed,and the pore geometries of both sandstones were compared using the 3D medial axis(3DMA)method.Pore and throat radii,pore coordination number,tortuosity,number of connecting paths,connecting path volume,and other factors were determined using 3DMA.The Otway sandstone was characterized by a small effective throat/pore radius ratio.Based on the fluid flow mechanism,the lower effective throat/pore radius ratio results in a lower permeability induced by the fluid energy loss,which means that the 3D geometrical shape of void spaces affects the permeability value.     

Microstructure characterization and compressive performance of 3D needle-punched C/C–SiC composites fabricated by gaseous silicon infiltration

3D needle-punched C/C-SiC composites were fabricated from carbon fiber reinforced carbon (C/C) preforms, with densities of 1.05?g/cm³ and 1.28?g/cm³, by the gaseous silicon infiltration (GSI) method at fabrication temperatures from 1500?°C to 1800?°C. The compressive strengths and elastic moduli in transverse direction are larger than those measured under longitudinal compression except that samples fabricated from 1.28?g/cm³ density exhibit lower elastic moduli in transverse direction than in longitudinal direction. The compressive strength and modulus increase with fabrication temperature at 1500?°C and 1600?°C, and then decrease with higher fabrication temperature. Samples fabricated from the lower density C/C preforms have greater compressive strength and modulus. X-ray tomography was applied before and after the mechanical tests to characterize the microstructure and damage patterns, and the results indicated that for C/C-SiC composites fabricated at 1700?°C from 1.28?g/cm³ density C/C preform the matrix has a volume fraction (vol%) of 36.9%, and the initial intra-bundle cracks (0.6?vol%) display a space crossing structure while the inter-bundle pores (6.0?vol%) are special irregularly distributed.     

Study of spatial and temporal evolution of Ar and F atoms in SF6/Ar microsecond pulsed discharge by optical emission spectroscopy

The study of sulfur hexafluoride (SF₆) discharge is vital for its application in gas-insulated equipment. Direct current partial discharge (PD) may cause SF₆ decomposition, and the decomposed products of SF₆, such as F atoms, play a dominant role in the breakdown of insulation systems. In this study, the PD caused by metal protrusion defects is simulated by a needle-plate electrode using pulsed high voltage in SF₆/Ar mixtures. The spatial and temporal characteristics of SF6/Ar plasma are analyzed by measuring the emission spectra of F and Ar atoms, which are important for understanding the characteristics of PD. The spatial resolved results show that both F and Ar atom spectral intensities increase first from the plate anode to the needle and then decrease under the conditions of a background pressure of 400 Pa, peak voltage of −1000 V, frequency of 2 kHz, pulse width of 60 μs, and electrode gap of 5–9 mm. However, the distribution characteristics of F and Ar are significantly different. The temporal distribution results show that the spectral intensity of Ar decreases first and then increases slowly, while the spectral intensity of F increases slowly for the duration of the pulsed discharge at the electrode gap of 5 mm and the pulse width of 40–80 μs.     

Transparent niobate glass-ceramics for optical limiting

The construction of nonlinear optical materials featuring asymmetric transmission of light is of great technological importance for various applications, including optical switching and optical power limiting. A significant challenge is the scalable fabrication of material candidates with good photochemical stability, high optical transmittance, and excellent optical limiting performance. Here, we present a nanocrystallization avenue for constructing hybrid optical limiting materials that exhibit ultrafast and robust optical limiting performance. The experimental results show that the controllable relaxation of a niobate glass may lead to the clustering of Nb-O units and contracting of the bandgap. It results in the notable improvement in nonlinear optical properties, including the enhanced saturation irradiance (380 GW/cm²), doubly increased nonlinear coefficient, and decreased limiting threshold (200 GW/cm²). Our results suggest a promising material that exhibits promising applications for protecting eyes and sensitive components from laser-induced damage.     

基于双态混沌PSO的机载激光通信视轴稳定控制

机载空间激光通信视轴稳定是激光通信链路建立的前提。在视轴稳定平台中应用自抗扰控制方法取得了良好的控制效果,但自抗扰控制需调整参数众多且缺乏规范的调整手段。针对自抗扰控制调参难的问题,本文提出了一种利用双态混沌粒子群算法优化自抗扰控制参数的方法。仿真结果表明,与PSO-PID控制方法相比,该方法具有更快的响应速度,更强的抗干扰能力和更好的鲁棒性。     

一种激光眼组织切割系统设计及实验

针对医生手工进行白内障手术,病人术后视力恢复效果取决于医生手术熟练度的问题,提出了一种激光眼组织切割光路运动系统。系统采用直线电机带动平面镜运动的形式改变光路,利用聚焦透镜实现激光对样品单点切割。建立了白内障手术中碎核、撕囊扫描轨迹的数学模型,通过MATLAB仿真验证扫描轨迹数学模型的正确性。最后以透明塑料为样品模拟眼球实验,结果表明此系统可以实现给定轨迹切割,为激光眼组织切割设备研发提供了一种新方案。     

A Pyropheophorbide Analogue Containing a Fused Methoxy Cyclohexenone Ring System Shows Promising Cancer-Imaging Ability

Herein we report the synthesis, photophysical properties, positron emission tomography (PET) imaging and photodynamic therapy (PDT) efficacy of methyl 3-(1′-m-iodobenzyloxy)ethyl-3-devinyl-verdin 4 (with or without the ¹²⁴I isotope). The PET imaging ability and ex vivo biodistribution of [¹²⁴I] 4 were compared with the well-studied methyl [3-(¹²⁴1′-m-iodobenzyloxy)ethyl]-3-devinyl-pyropheophorbide-a methyl ester (PET-ONCO or [¹²⁴I] 2 ) and [¹⁸F]fluorodeoxyglucose ([¹⁸F]FDG) in BALB/c mice bearing colon-26 tumors. Whole-body PET images of [¹²⁴I] 4 containing a fused methoxy cyclohexenone ring system showed excellent tumor contrast with time (72>48>24 h post-injection). Ex vivo biodistribution results indicate that relative to the current clinical standard [¹⁸F]FDG and [¹²⁴I] 2 in 2 % ethanol formulation, [¹²⁴I] 4 , at the same radioactive dose (25 μCi per mouse), showed higher tumor uptake at 24 h post-injection and longer tumor retention. In biological environments, compound 4 showed lower fluorescence and lower singlet oxygen yield than 2 , which is possibly due to higher aggregation caused by the presence of a fused cyclohexenone ring system, resulting in limited in vitro/in vivo PDT efficacy. Therefore, the chlorophyll-a analogue [¹²⁴I] 4 provides easy access to a novel PET imaging agent (with no skin phototoxicity) to image cancer types—brain, renal carcinomas, pancreas—in which [¹⁸F]FDG shows limitations.     

Synthesis and evaluation of several high absorbance black pigments for spacecraft thermal control coatings

Using black coatings and materials with high light absorbance that are capable of absorbing photons at visible and longer wavelengths is a very effective way to reduce unwanted stray light, also known as optical noise, within optical equipment. These lights can be greatly reduced to a reasonable level by functional and performable black coatings that are modified to absorb incident light as much as possible by their specific pigments. In the present work, several carbonaceous pigments were synthesized for the first time from wasteful materials and their optical properties in the visible and near‐infrared ranges studied. First, MCM‐48 and SBA‐15 were synthesized at different conditions and were then used as templates for carbonaceous products. SSS‐1 (the carbonic pigment synthesized by the mixture of sucrose and sodium silicate), SSS‐2 (the carbonic pigment synthesized by the mixture of sawdust and sodium silicate), and mesoporous carbon pigments (CMK‐3 and CMK‐1 with different levels of saturations) were synthesized. Finally, their structure, morphology, and optical properties were investigated by X‐ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE‐SEM), and Diffuse Reflectance Spectroscopy (DRS). The results indicated that the SSS‐1 pigment had a lower reflectance (below 1%) than carbon black (about 2.5%) in the visible region despite it being more cost‐effective than carbon black. The mesoporous pigments showed very high light absorbance in the visible region (about 2.5%). Compared with other black pigments, the CMK‐1 was the blackest synthesized material with a very low reflectance (about 0.05% in visible region), making it an ideal candidate as a super black pigment for reducing unwanted stray light within optical equipment.